Freedom Kayaks Ltd produces bespoke, British hand crafted composite kayaks and paddles
 

You are here

Home

This kayak is suitable for bigger paddlers, or small/average sized paddlers looking for more initial stability and maneuverability. NoName is very fun and comfortable to paddle. It is a multi chine "stitch and glue" hull, which gives a nicely contoured shape with a smooth, sharp entry, nearly eliptical mid-section with plenty of room and slick stern. It has very good Initial stablility and a comforable secondary stablilty. It is fast and responsive and gives a very smooth ride.

Plans still can be downloaded from here, but you can visit yaKayak new site and download from there new or improved version of plans. New site is still under active development, but free plans are available for download.

89 comments

Submitted by Ersan on Sat, 06/07/2014 - 17:58

well done
Submitted by tsakas on Thu, 09/11/2014 - 02:03

Well done
Submitted by Davide on Mon, 10/06/2014 - 18:57

thanks for the free plans) really great!
Submitted by admin on Mon, 10/06/2014 - 22:14

For NoName 7 kg epoxy resin (+ hardener inside that quantity) should be enough. As I remember - for me was enough something about 6 kg. 10m2 110 g/m2 fiberglass cloth for the outside and 10m2 160 g/m2 for the inside. It will remain plenty of trimmings, but it's good layer to be in one piece (one for the bottom and one for the top). You can use less if you use cuts for the top panels(with overlaps) but i'm not sure whether it is worth. On stitches (just inside) i put 210 g/m2 chopped from a roll, but much easy and clear will be to use fiberglas tape there. Like this one http://www.ebay.co.uk/itm/Fibreglass-Open-Weave-Woven-Cloth-Tape-For-Polyester-Epoxy-Resins-50mm-x-50m-/221550688081?pt=UK_CarsParts_Vehicles_BoatEquipment_Accessories_SM&hash=item3395733751 Thanks for your interest, Davide!
Submitted by Davide on Tue, 10/07/2014 - 11:21

thank you very much. slightly less resin than what i thought. we are going to build a model in scale, pictures soon)
Submitted by milf323 on Mon, 02/03/2020 - 18:29

milf cam http://milf-cam.xyz
Submitted by milf124 on Mon, 02/03/2020 - 20:32

milf cam http://milf-cam.xyz
Submitted by Davide on Sat, 10/11/2014 - 10:25

hi, how you made it 'multi-color'? my first idea, was you paint the plywood sections before assemble it with .. i dont know the english word. transparent paint that make the color darker. now, not so sure anymore... thanks!
Submitted by admin on Sat, 10/11/2014 - 10:52

The painting process was after assembling, just before first coat of epoxy resin and fiberglass. Using tape for clear edge. The paint is acrylic on water base. Еpoxy dissolves paint and goes through after about 10-15 minutes (at least this brands which i've use), so you have to work fast to these places in lamination process or else paint will be in epoxy after that time and every try to spread resin will lead to a big mess. Try first on some plywood sheat to check if your resin dissolves your paint and what is the time for that. The other way is to use water stain on panels before assembling, but only if you are sure that cuts are so precise, that there is no need for any sanding or extra work on the external side. Which is not usually the case.
Submitted by admin on Sat, 10/11/2014 - 11:46

Or you can use veneer (0.5 - 0.6 mm) instead paint before coating and make whatever design you want.
Submitted by erick stevi on Tue, 11/04/2014 - 21:36

so, what the next plan?
Submitted by admin on Tue, 11/04/2014 - 22:04

probably 430x66 cm. With big rocker and almost vertical bow and stern. Do you have any suggestions?
Submitted by milf241 on Mon, 02/03/2020 - 16:22

milf cam http://milf-cam.xyz
Submitted by milf141 on Mon, 02/03/2020 - 18:34

milf cam http://milf-cam.xyz
Submitted by hanghtedan on Tue, 02/04/2020 - 07:51

Hello good article.
Submitted by javier on Sun, 01/18/2015 - 13:06

A lot of thanks to share knowledge for free. I'll try to build the noname after summer
Submitted by Milos on Sat, 01/24/2015 - 15:04

Hi there. I'm hoping to find time and start building NoName. One question, should plywood be waterproof or any will do? Milos
Submitted by admin on Sat, 01/24/2015 - 15:23

Hi Milos, plywood used for kayak on pictures and videos is a regular one. This same non waterproof plywood is used in DoubleTrouble too. And for more then a 3 years of use there is not a single problem with that. Epoxy resin sealed all. Just have to use epoxy, not polyester or vinilester resin. And to be sure that there is no places without epoxy cover.
Submitted by Milos on Sun, 01/25/2015 - 12:10

Thank you for info. I have plywood factory near by, tomorrow I'm there to order :). I wouldn't use anything else than epoxy, being from aviation I have great respect for it. I'll do single first to measure my self and if all is good a double to have a ride with my daughter.
Submitted by admin on Sun, 01/25/2015 - 16:29

Super. Ako imas neke probleme u razlicite etape gradnje - koristi kontakt formu pa ako mogu cu da pomognem. Pozdrav!
Submitted by Milos on Tue, 06/28/2016 - 18:23

Gde ste bre srbende, svaka cast za sajt lozim se da napravim ovo cudo pa cu javiti kako ide. Pozdrav!
Submitted by Paulo Fernando on Sun, 10/25/2015 - 04:11

Hello! Thank you for your plans, I am very excited to begin construction. I have a question, in my country - Brazil -. plywood sheet measuring 160 cm x 220 cm, so I want to use the puzzle plans of NoName, I want know if they are accurate and have been tested or is it better to build a model before. thank you Paulo
Submitted by admin on Sun, 10/25/2015 - 19:26

Hi Paulo, I haven't tested puzzle plans - i've build NoName before plans was made. But as far as i know several people started that built and till now nobody complains. Always is good to build a model in some scale before. At least for me. And especially if this is the first built. In that way you'll not only check drawings, but also you have an oportunity to see how it will go when you start actual built, what problems could occur etc. Wish you success!
Submitted by milf243 on Mon, 02/03/2020 - 16:53

milf cam http://milf-cam.xyz
Submitted by milf131 on Mon, 02/03/2020 - 19:02

milf cam http://milf-cam.xyz
Submitted by milf321 on Mon, 02/03/2020 - 17:05

milf cam http://milf-cam.xyz
Submitted by milf242 on Mon, 02/03/2020 - 19:14

milf cam http://milf-cam.xyz
Submitted by AdrianL91 on Fri, 02/19/2016 - 06:14

Hi there. Thank you for your plans. Can I print out the NoName Kayak Plans on A0 size papers and then use it as a measurement to cut the parts on plywoods? And what is the thickness of plywood that I should use? Thank you, Adrian
Submitted by admin on Fri, 02/19/2016 - 07:53

Hi Adrian, yes, you can print on a0 and then transfer to plywood, but first you have to make some changes on plans. A0 paper is not so wide as sheets in plans, but you can easily rearange parts in desired format. The other option is to print as is, but with overlap and cross-marks.Then you can put together everything in one sheet. 4 mm thickness will be good, Hope this helps.
Submitted by AdrianL91 on Sun, 02/21/2016 - 03:32

Thank you so much for the advice. This will be my first home made s&g plywood kayak. I'll send you the picture if I manage to build one. Thanks again.
Submitted by milf413 on Mon, 02/03/2020 - 17:05

milf cam http://milf-cam.xyz
Submitted by milf242 on Mon, 02/03/2020 - 19:14

milf cam http://milf-cam.xyz
Submitted by Eli on Tue, 03/01/2016 - 06:00

First off, I love this design. Thank you so much for sharing!! As an experienced boat builder and glasser, I find the stitch and glue method fascinating. I'm very excited to try it out! I have few questions about materials that I couldn't find on the web and my supplier was hesitant to answer.. What is the importance of using epoxy resin over a polyester? I've worked for a few years at a boat company that builds world-class sport boats- don't worry, I'm only going to use these plans for PERSONAL purposes ONLY. I understand that it is completely a different a territory- fiberglass, carbon fiber and plasticore vs. marine grade plywood. Does the polyester resin interact poorly with the glue in plywood? I couldn't imagine water/sunlight would bother it, as it would be sealed on the exterior with a marine grade, alkyd based oil enamel and the interior sealed with gelcoat treated with surface seal or a wax additive. I live in a very dry climate (we ship most of our boats) and the kayak would only be in the water for a few hours a week, so I plan on using a top side paint for the exterior and a clear coat over the top of that. I'm just curious because I would be able to buy an advanced polyester resin at work for dollars/gallon versus ordering the expensive (but equally amazing) epoxy resin for fifty times that amount. Thank you for your time, - Eli
Submitted by admin on Tue, 03/01/2016 - 10:24

Thanks Eli, All books and tutorials that i read before starting to build s&g kayaks are strictly about use of the epoxy resin. And from my personal experience, i'm totaly agree with that. Here, where i live, polyester and vinylester resin is from 6 to 10 times cheaper then epoxy. That's why i've made some experiments. First of all, polyester resin didn't bond very well to the plywood. Which is not the case with the epoxy. Further more, when polyester cures, it shrinks much more then epoxy and tends to bend laminated plywood. When this is imposible (because the kayak panels are already glued together and kayak shape is formed) this leads to delaminating. Even if this is not happened right away, very soon delaminating will become reality and all hard work and expensive materials will be for nothing. Also, epoxy compared to other resins is very near to zero (0.andseveralzeroesherebeforesomenumber - this depends on the brand, of course) when it's about watertightness. While polyester resin (even with a gelcoat, which is hard to achieve without mould) is not so waterproof. And water that goes in couldn't go out. This leads to rot onto plywood and delaminating too. I'm aware that now on the market is a big variety of resins with different quality and designation, but i'll continue to use epoxy in s&g. Hope this helps.   Jordan  
Submitted by milf432 on Mon, 02/03/2020 - 18:10

milf cam http://milf-cam.xyz
Submitted by milf214 on Mon, 02/03/2020 - 20:14

milf cam http://milf-cam.xyz
Submitted by sumatra travel route on Tue, 03/01/2016 - 06:16

Kayaking is a sport that adrenaline while doing so, but not to be on the race course, while on vacation to a place that no river has strong currents, is also fun to wear kayak to scour the river
Submitted by milf423 on Mon, 02/03/2020 - 17:40

milf cam http://milf-cam.xyz
Submitted by milf341 on Mon, 02/03/2020 - 19:46

milf cam http://milf-cam.xyz
Submitted by Markos on Wed, 03/02/2016 - 18:12

Greetings from Greece and congratulations on a wonderful design and a beautiful boat!!! I seriously intend to build your design and since i am an absolute novice i would like to ask you a few questions. Well : 1. Have i got it right that printing full scale the pdf file that you are kindly sharing will give me all the information required in order to cut the real size planks and bulkheads ? 2. How do you apply thickened epoxy and fiberglass tape in the inner seam between the deck and the hull after you have stitched them together ? 3. Do you consider your design a sea kayak ? I thank you in advance for your answers ! I am sure i will come again soon with a few more, so sorry....
Submitted by admin on Thu, 03/03/2016 - 08:18

Thanks Markos! 1. Yes, but you can use also offsets table if there is some problem with printing. The best result will be if you use cnc to cut parts (dxf files) 2. I apply thickened epoxy on seams between deck and hull inside from cockpit and hatches openings as far as i can. watch this video https://www.youtube.com/watch?v=ZOqdKitkrLo Anyway, it will be good to visit Nick Shade and OrcaBoats channels on youtube. Check "Links" section here. 3. I haven't tested my kayaks in sea yet (live far from sea, unfortunately), but i'm pretty sure they will behave good, especialy Anuket. Of course, it depends on conditions and paddler experience too. You can use contact form if you have more questions, don't worry
Submitted by milf431 on Mon, 02/03/2020 - 17:31

milf cam http://milf-cam.xyz
Submitted by milf242 on Mon, 02/03/2020 - 19:38

milf cam http://milf-cam.xyz
Submitted by milf141 on Mon, 02/03/2020 - 16:37

milf cam http://milf-cam.xyz
Submitted by milf132 on Mon, 02/03/2020 - 18:48

milf cam http://milf-cam.xyz
Submitted by Donald Bilton on Thu, 04/28/2016 - 22:11

For a beginner, your plans are downright amazing and I am going to donate as soon as the project is complete.
Submitted by admin on Mon, 05/09/2016 - 10:14

Thanks, Donald!
Submitted by Donald Bilton on Fri, 04/29/2016 - 02:17

My t-drywall measuring stick in in inches only. Is there any easy way to get this to convert over into inches that are more precise then say 6.231 inches? My measuring stick just will be horribly approximating all the way through.
Submitted by admin on Mon, 05/09/2016 - 10:21

I have plans only in mm, sorry. But instead offset tables you can use CNC to cut pieces. It will be much more precise, better look and less hassle in building process later
Submitted by Marcos Campos on Mon, 05/16/2016 - 22:21

I live in the beach. I wanted to buy a kayak ready. But desafil to build fascinated me. Thank you for providing this very interesting project.

Add new comment

You must have Javascript enabled to use this form.