You are here

More details about hidrostatic and stability - inside zip file

How to read stability graph and what all these numbers mean? Very good explanation here.

Version 1 of those plans is for long previously glued plates. If you need "puzzle"-style plans for short sheets of plywood - use contact form or wait some time. I'll put here Version 2 later.

Version 2 (puzzle style drawings) of NoName kayak is available.


Plans are for S&G kayak NoName builded with 4 mm sheets of plywood, EPOXY resin (NOT polyester, vinilester or any other kind) and fiberglass (270 gr on stitches, 150 gr inside and 100 gr outside). I can't stop you to use other materials, but this is at your own risk. However, please, use Epoxy resin!

The technology in general is the same as for any other s&g kayak. Plenty of Info about that all over the Internet.

I'm not responsible for problems which could occur in process of your work.

Hatches and coaming riser construction is up to you.

How many kayaks you can make from these plans? As many as you want. You are not obligated with anything if you download and use these plans. However, you may consider donation.

If there is anything unclear or need for plans in different file format, or more details - please, use contact form and i'll do my best to help.

Free program for dwg file format you can download from here

Plans still can be downloaded from here, but you can visit yaKayak new site and download from there new or improved version of plans. New site is still under active development, but free plans are available for download.

Print1 and Prin2 pdf's are parts ready to be printed from pdf onto a1 format paper. Do not use any other options except None in print settings for scale. Measure 10x10 square after print to be sure that everything is ok. Part b3 is on both pdf files. I cannot make pdf tall more then 505 cm, so you'll need to connect this drawing after print.
Was this useful?
Average: 5.5 (50 votes)